Volume 3 • Issue 2 • PP: 17–21 • 2024
On a Novel Simulation of a Control Technique for Power Oscillation Damping and Applications
Open Access & Copyright
© 2024 The Author(s). Published by ASPG. This article is licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
View PDF Abstract
This research presents a novel simulation model of adaptive control to implement a control process using the MIT-rule adjustment mechanism for power oscillation damping in the single-machine infinite-bus (SMIB) system, and to measure its possible effects on the response of the damper by changing its parameters according to an external disturbance using Simulink. The results show that the use of the model-reference adaptive control (MRAC) technique maintains the response of the damper when the transfer function changes because of an external disturbance.
Keywords
References
[1] P. Gain, “Design of a model reference adaptive con-troller using modified MIT rule for a second order sys-tem,” Advances in Electronic and Electric Engineering, vol. 3, no. 4, pp. 477–484, 2013.
[2] M. Mosaad and F. Salem, “LFC-based adaptive PID controller using ANN and ANFIS techniques,” JESIT, vol. 1, no. 3, pp. 212–222, 2014.
[3] P. Swarnkar, “Effect of adaptation gain on system per-formance for model reference adaptive control scheme using MIT rule,” International Journal of Electrical and Computer Engineering, vol. 4, no. 10, pp. 1547–1552, 2010.
[4] I. Mohamed, “Model reference adaptive control of STATCOM for grid integration of wind energy systems,” IET, vol. 12, no. 5, pp. 605–613, 2017.
[5] R. Kumar and S. Das, “Comparative assessment of two different model reference adaptive system schemes for speed-sensorless control of induction motor drives,” IET, vol. 10, no. 2, pp. 141–154, 2016.
[6] R. Khanna, “Maximum power point tracking using model reference adaptive control,” IEEE, vol. 29, no. 3, pp. 1490–1499, 2014.
[7] T. Raja, “Design of PI controller using MRAC technique for the control of DC electromotor drive,” IJIREEICE, vol. 6, no. 1, pp. 36–44, 2018.
[8] S. Oltean, M. Dula, and A. Duka, “Model reference adaptive control for slow processes: A case study on level process control,” Procedia Technology, vol. 22, no. 1, pp. 629–636, 2016.
[9] B. Barabanov, R. Ortega, and A. Astolfi, “Is normal-ization necessary for stable model reference adaptive control?” IEEE Transactions on Automatic Control, vol. 50, no. 9, pp. 1384–1390, 2005.
[10] A. Kanojia and V. Chandrakar, “Damping of power system oscillations by using coordinated tuning of POD and PSS with STATCOM,” World Academy of Science, Engineering and Technology, vol. 50, pp. 1067–1072, 2009.
Cite This Article
Choose your preferred format
Publisher's Note
The statements, opinions, and data presented in this article are solely those of the author(s) and do not necessarily represent those of ASPG, the journal, or its editors. ASPG and the editors disclaim responsibility for any harm arising from the use of any ideas, methods, instructions, or products described in this article, to the fullest extent permitted by applicable law.