Submit Your Paper
  1. Home
  2. Journals
  3. International Journal of BIM and Engineering Science

International Journal of BIM and Engineering Science

Journal DOI

https://doi.org/10.54216/IJBES

Submit Your Paper

2571-1075ISSN (Online)
Submit Your Paper

Journal Menu

Homepage Journal Overview Editorial Board Submitting Articles Indexing & Abstracting

Journal Volumes

International Journal of BIM and Engineering Science

Volume 2 , Issue 2 , PP: 01-22, 2019 | Cite this article as | XML | Html | PDF | Full Length Article

Practical approach for paving the way to motivate BIM non-users to adopt BIM

Ashraf Elhendawi 1 * , Hany Omar 2 , Emad Elbeltagi 3 , Andrew Smith 4

  • 1 School of Engineering and the Built Environment, Edinburgh Napier University, UK - (ashrafnasr86a1@yahoo.com)
  • 2 Department of Architecture and the Built Environment, Faculty of Environment and Technology, University of the West of England, UK - ()
  • 3 Professor of Construction Management, Structural Engineering Department, Mansoura University, Egypt - (eelbelta@mans.edu.eg)
  • 4 School of Engineering and the Built Environment, Edinburgh Napier University, UK - (Andrew.Smith1@gmail.com)

    • Doi: https://doi.org/10.54216/IJBES.020201

    Abstract

    Typically, the Architecture, Engineering, and Construction (AEC) industry is considered one of the most effective contributor to the national developments worldwide. However, the AEC industry is facing myriad challenges due to the pressing calls for creativity and innovative solutions. Several issues are confronted such as failure to meet client satisfaction, delays in delivering projects on time, cost overruns, low quality, conflicts among parties, safety issues, increasing requests for change orders, tremendous increases in materials waste and project complexity. Building Information Modeling (BIM) is rapidly growing worldwide as a viable tool for improving the efficiency of the AEC industry to solve its salient issues. However, BIM is seldom adopted on the government level, especially in the developing countries. This study aims to explore the stakeholders’ perceptions on the benefits of BIM and the barriers that hindered its adoption. Furthermore, practical solutions to motivate BIM non-users to adopt BIM are proposed. A questionnaire was sent to BIM users and non-users in the Kingdom of Saudi Arabia (KSA) as a case study. The key findings that deterred the implementation of BIM were personal correlated issues such as resistance to change and lack of appropriate awareness of BIM. This study convinces the industry players concerning BIM benefits and reveals the barriers and their potential solutions to encourage them to reap the benefits from BIM adoption.

    Keywords :

    BIM barriers, benefits, BIM implementation, AEC, KSA, top management

    References

    [1]   Abbas, A., Din, Z. & Farooqui, R., 2016. Integration of BIM in construction management education: An overview of Pakistani engineering universities. Procedia Engineering, Volume 145, pp. 151-157.

    [2]   Abbasnejad, B. & Moud, H., 2013. BIM and basic challenges associated with its definitions, interpretations and expectations. International Journal of Engineering Research and Applications (IJERA), 3(2), pp. 287-29.

    [3]   Ahmed, S., Dlask, P., Selim, O. & Elhendawi, A., 2018. BIM Performance Improvement Framework for Syrian. International Journal of BIM and Engineering Science, 1(1).

    [4]   Alhumayn, s., Chinyio, E. & Ndekugri, I., 2017. The Barriers And Strategies Of Implementing Bim In Saudi Arabia. WIT Transactions on The Built Environment, Volume 169, pp. 55-67.

    [5]   Almutiri, Y., 2016. Empirical investigation into development of a curricular framework to embed building information modelling with undergraduate architectural programmes within Saudi Arabia , Manchester, England,UK: Doctoral dissertation, University of Salford.

    [6]   Amor, R., Jalaei, F. & Jrade, A., 214. Integrating Building Information Modeling (BIM) and Energy Analysis Tools with Green Building Certification System to Conceptually Design Sustainable Buildings.. Journal of Information Technology in Construction, Volume 19, pp. 494-519.

    [7]   Arayici, Y. et al., 2009. BIM implementation for an architectural practice.. Managing It in Construction/Managing Construction for Tomorrow, pp. 689-696.

    [8]   Autodesk Design Academy, 2017. BIM for Construction Management and Planning. [Online] 
    Available at: https://academy.autodesk.com/curriculum/bim-construction-management-and-planning [Accessed 29 October 2017].

    [9]   Autodesk, 2015. Top 10 Benefits of BIM. [Online] Available at:https://damassets.autodesk.net/content/dam/autodesk/www/campaigns/autocadforconstruction/Autodesk_Top10BenefitsOfBIM.pdf[Accessed 10 September 2017].

    [10]                  Azhar, . S., 2011. Building Information Modeling (BIM): Trends, Benefits,Risks, And Challenges For The AEC Industry. Leadership and management in engineering, 3(11), pp. 241-252.

    [11]                  Azhar, . S., Carlton, W., Olsen, . D. & Ahmad, . I., 2011. Building information modeling for sustainable design and LEED® rating analysis. Automation in construction, Volume 20(2), pp. 217-224.

    [12]                  Azhar, S., Khalfan, M. & Maqsood, . T., 2015. Building information modelling (BIM): now and beyond. Construction Economics and Building, 4(12), pp. 15-28.

    [13]                  Baik, A., Yaagoubi, R. & Boehm, J., 2015. Integration of Jeddah historical BIM and 3D GIS for documentation and restoration of historical monument. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 40(5), p. 2.

    [14]                  Banawi, A., 2017. Barriers to Implement Building Information Modeling (BIM) in Public Projects in Saudi Arabia. s.l., In International Conference on Applied Human Factors and Ergonomics (pp. 119-125). Springer, Cham.

    [15]                  Bryde, D., Broquetas, M. & Volm, J., 2013. The project benefits of building information modelling (BIM). International journal of project management, 7(31), pp. 971-980.

    [16]                  Bui, N., Merschbrock, C. & Munkvold, B., 2016. A review of Building Information Modelling for construction in developing countries. Procedia Engineering, Issue 164, pp. 487-494.

    [17]                  Chan, C., 2014. Barriers of implementing BIM in construction industry from the designers’ perspective: a Hong Kong experience. Journal of System and Management Sciences, 2(4), pp. 24-40.

    [18]                  Chien, K., Wu, Z. & Haung, S., 2014. Identifying and assessing critical risk factors for BIM projects: Empirical study. Automation in construction, Volume 45, pp. 1-15.

    [19]                  Construction, M.H, 2012. The business value of BIM in North America: multi-year trend analysis and user ratings (2007-2012), North America: McGraw-Hill Construction.

    [20]                  Construction, M.H, 2012. The business value of BIM in North America: multi-year trend analysis and user ratings (2007-2012)., s.l.: Smart Market Report.

    [21]                  Doumbouya, L., Gao, G. & Guan, C., 2016. Adoption of the Building Information Modeling (BIM) for construction project effectiveness: The review of BIM benefits. American Journal of Civil Engineering and Architecture, 3(4), pp. 74-79.

    [22]                  Eadie, R. et al., 2013. BIM implementation throughout the UK construction project lifecycle: An analysis. Automation in Construction, Issue 36, pp. 145-151.

    [23]                  Eadie, R. et al., 2014. Building information modelling adoption: an analysis of the barriers to implementation. Journal of Engineering and Architecture, 2(1), pp. 77-101.

    [24]                  Eastman, . C., Teicholz, P., Sacks, . R. & Liston, K., 2011. BIM Handbook,a Guide to Building Information Modelling. 2nd ed. Hoboken: John Wiley & Sons, Inc..

    [25]                  Eastman, C., Teicholz, P., Sacks, R. & Liston, K., 2008. BIM handbook: A guide to building information modeling for owners, managers, architects, engineers, contractors, and fabricators. 1st ed. Hoboken, NJ.: John Wiley and Sons.

    [26]                  Elbeltagi, E. & Dawood, M., 2011. integrated visualized time control system for repetitive construction projects. Automation in Construction, 7(20), pp. 940-953.

    [27]                  Elhendawi, A., Smith, A. & Elbeltagi, E., 2019. Methodology for BIM implementation in the Kingdom of Saudi Arabia. International Journal of BIM and Engineering Science , 2(1).

    [28]                  Elmualim, A. & Gilder, J., 2014. BIM: innovation in design management, influence and challenges of implementation. Architectural Engineering and design management, 10((3-4)), pp. 183-199.

    [29]                  Farah, R., 2014. Building Information Modeling (BIM) Implementation in Saudi Arabia: Potentials and Barriers, KSA: The University of Salford School of the Built Environment;MSc dissertation.

    [30]                  Forbes, L. & Ahmed, S., 2011. Modern construction: lean project delivery and integrated practices. s.l.:CRC Press.

    [31]                  Ganah, A. & John, G., 2015. Integrating building information modeling and health and safety for onsite construction. Safety and health at work, 6(1), pp. 39-45.

    [32]                  Gerges, M, et al., 2017. An investigation into the implementation of Building Information Modeling in the Middle East. Journal of Information Technology in Construction (ITcon), 1(22), pp. 1-15.

    [33]                  Gerges, M., Ahiakwo, O., Jaeger, M. & Asaad, A., 2016. Building Information Modeling and Its Application in the State of Kuwait. . World Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 1(10), pp. 81-86.

    [34]                  Giang, D. & Pheng, L., 2011. Role of construction in economic development: Review of key concepts in the past 40 years. Habitat International. Habitat International, 1(35), pp. 118-125.

    [35]                  Glick, S. & Guggemos, A., 2009. IPD and BIM: Benefits and opportunities for regulatory agencies. Gainesville, Florida, In Proceedings of the 45th ASC National Conference, pp. 2-4.

    [36]                  Ham, N. et al., 2008. A study on application of bim (building information modeling) to pre-design in construction project.. s.l., In Convergence and Hybrid Information Technology, ICCIT'08.Third Internat.

    [37]                  Harrison, C. & Thurnell, D., 2014. 5D BIM in a consulting quantity surveying environment. 

    [38]                  Jernigan, F., 2014. Big BIM little BIM. 2nd ed. Maryland: 4Site Press publisher.

    [39]                  Karna, S., Junnonen, J. & Sorvala, V., 2009. Modelling structure of customer satisfaction with construction. Journal of facilities management, 7(2), pp. 111-127.

    [40]                  Khalil, R., 2017. Value Engineering for Public Construction Projects In Qatar, Edinburgh : MSc Dissertation Edinburgh Napier University.

    [41]                  Latiffi, A., Mohd, S., Kasim, N. & Fathi, M., 2013. Building information modeling (BIM) application in Malaysian construction industry. International Journal of Construction Engineering and Management, A(2), pp. 1-6.

    [42]                  Lee, S., Kim, . K. & Yu, J., 2014. BIM and ontology-based approach for building cost estimation. Automation in Construction, Issue 41, pp. 96-105.

    [43]                  Linderoth, H., 2010. Understanding adoption and use of BIM as the creation of actor networks. Automation in construction, 19(1), pp. 66-72.

    [44]                  Liu, R., Issa, R. & Olbina, S., 2010. Factors influencing the adoption of building information modeling in the AEC Industry,In Proceedings of the International Conference on Computing in Civil and Building Engineering. Nottingham, Nottingham University Press, pp. (139-145.

    [45]                  Love, P. et al., 2014. A benefits realization management building information modeling framework for asset owners. Automation in construction, Volume 37, pp. 1-10.

    [46]                  Marzouk, M. et al., 2014. Modeling sustainable building materials in Saudi Arabia. In Computing in Civil and Building Engineering , pp. 1546-1553.

    [47]                  Matarneh, R. & Hamed, S., 2017. Barriers to the Adoption of Building Information Modeling in the Jordanian Building Industry. Open Journal of Civil Engineering, 3(7), p. 325.

    [48]                  McCartney, C., 2010. Factors affecting the uptake of building information modelling (BIM) in the Auckland architecture, engineering & construction (AEC) industry, New Zealand.: s.n.

    [49]                  McGraw-Hill, 2009. The business value of BIM: Getting Building Information Modeling in to Bottom Line, New York: Smart Market Report. New York: McGraw-Hill..

    [50]                  McGraw-Hill, 2012. The business value of BIM in North America: multi-year trend analysis and user ratings (2007-2012), New York: McGraw-Hill.: Smart Market Report.

    [51]                  Memon, A., Rahman, I., Memon, I. & Azman, N., 2014. BIM in Malaysian construction industry: Status, advantages, barriers and strategies to enhance the implementation level. Research Journal of Applied Sciences, Engineering and Technology, 5(8), pp. 606-614.

    [52]                  Moreno, C., Olbina, S. & Issa, R., 2013. School of building construction , USA.: university of Florida.

    [53]                  National Building Specification, 2014. NBS National BIM Report, UK: NBS.

    [54]                  Omar, H., 2015. Solutions for the UAE Architecture, Engineering, and Construction (AEC) industry to mandate Building Information Modeling (BIM), Dubai : (Doctoral dissertation, The British University in Dubai (BUiD))..

    [55]                  Omar, H. & Dulaimi, M., 2015. Creating a sustainable future: Solutions for the construction waste in the Greater Cairo. Abu Dhabi, the first international conference of the CIB MENA research network, Smart, sustainable and healthy cities. Abu Dhabi University. 14-16 December 2014,, pp. 281-305.

    [56]                  Panuwatwanich, K. et al., 2013. Integrating building information modelling (BIM) into Engineering education: an exploratory study of industry perceptions using social network data.. 

    [57]                  Porwal, A. & Hewage, K., 2013. Building Information Modeling (BIM) partnering framework for public construction projects. Automation in Construction, Volume 31, pp. 204-214.

    [58]                  Sabol, L., 2008. Building information modeling & facility management. Dallas, Texas, USA.: IFMA World Workplace.

    [59]                  Saleh, M., 2015. Barriers and Driving Factors for Implementing Building Information Modelling (BIM) in Libya, Libya: (Master's thesis, Eastern Mediterranean University (EMU)-Doğu Akdeniz Üniversitesi (DAÜ))..

    [60]                  Salla, F., 2014. 15 advantages of using BIM. [Online] 
    Available at: http://blog.visualarq.com/2014/03/12/15-advantages-of-using-bim/
    [Accessed 14 December 2017].

    [61]                  Samuelson, O. & Björk, B., 2013. Adoption processes for EDM, EDI and BIM technologies in the construction industry. Journal of Civil Engineering and Management, 19(1), pp. S172-S187..

    [62]                  Saunders, M., Lewis, P. & Thornhill, A., 2012. Research Methods for Business Students: Lecturers' Guide.. s.l.:s.n.

    [63]                  Sebastian, R., 2011. Changing roles of the clients, architects and contractors through BIM. Engineering, Construction and Architectural Management, 18(2), pp. 176-187.

    [64]                  Shaban, M. & Elhendawi, A., 2018. Building Information Modeling in Syria: Obstacles and Requirements for Implementation. International Journal of BIM and Engineering Science, 1(1).

    [65]                  Succar, B., Sher, W. & Williams, A., 2013. An integrated approach to BIM competency assessment, acquisition and application. Automation in construction, Volume 35, pp. pp.174-189.

    [66]                  Volk, R., Stengel, J. & Schultmann, F., 2014. Building Information Modeling (BIM) for existing buildings—Literature review and future needs. Automation in construction, Volume 38, pp. 109-127..

    [67]                  Wang, J., Wang, X., Shou, W. & Bo Xu, , 2014. Integrating BIM and augmented reality for interactive architectural visualisation. Construction Innovation, 14(4), pp. 453-476.

    [68]                  Zewein, W., 2017. Assessment of using BIM with Lean Construction for effectiveness achievement of construction projects in Qatar, Edinburgh: MSc Dissertation Edinburgh Napier University.

     

     

    Cite This Article As :
    Elhendawi, Ashraf. , Omar, Hany. , Elbeltagi, Emad. , Smith, Andrew. Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science, vol. , no. , 2019, pp. 01-22. DOI: https://doi.org/10.54216/IJBES.020201
    Elhendawi, A. Omar, H. Elbeltagi, E. Smith, A. (2019). Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science, (), 01-22. DOI: https://doi.org/10.54216/IJBES.020201
    Elhendawi, Ashraf. Omar, Hany. Elbeltagi, Emad. Smith, Andrew. Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science , no. (2019): 01-22. DOI: https://doi.org/10.54216/IJBES.020201
    Elhendawi, A. , Omar, H. , Elbeltagi, E. , Smith, A. (2019) . Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science , () , 01-22 . DOI: https://doi.org/10.54216/IJBES.020201
    Elhendawi A. , Omar H. , Elbeltagi E. , Smith A. [2019]. Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science. (): 01-22. DOI: https://doi.org/10.54216/IJBES.020201
    Elhendawi, A. Omar, H. Elbeltagi, E. Smith, A. "Practical approach for paving the way to motivate BIM non-users to adopt BIM," International Journal of BIM and Engineering Science, vol. , no. , pp. 01-22, 2019. DOI: https://doi.org/10.54216/IJBES.020201

    Article Statistics

    View
    57023
    Download
    1516

    Download