3102 853
Full Length Article
International Journal of BIM and Engineering Science
Volume 4 , Issue 2, PP: 31-44 , 2021 | Cite this article as | XML | Html |PDF

Title

BIM Adoption around the World

  Raghad Safour 1 * ,   Sonia Ahmed 2 ,   Bilal Zaarour 3

1  Master in Building Information Modeling and Management, Syrian Virtual University
    (raghad_167004@svuonline.org)

2  Director of the Master's Program in Building Information Modeling and Management, Syrian Virtual University
    (bimm_pd@svuonline.org)

3  Textile Industries Mechanical Engineering and Techniques Department, Faculty of Mechanical and Electrical Engineering, Damascus University, Damascus, Syria
    (Bilalzaarour121@hotmail.com)


Doi   :   https://doi.org/10.54216/IJBES.040203


Abstract :

Adoption of Building Information Modelling (BIM) has increased significantly over the last few years, This paper explain the worldwide status of building information modeling (BIM) adoption from the perspectives of the engagement level, the Hype Cycle model, the technology diffusion model, and BIM services. An online questionnaire was published, and 157 engineers from many continents responded. Total, North America was the first among the continents. Countries in Asia perceived their stage mainly as slope of enlightenment (realize) in the Hype Cycle model. In the technology diffusion model, the main BIM-users worldwide were “early majority” (third stage), but those in the Middle East/Africa and South America were “early adopters” (second stage). In addition, the more advanced the country, the more number of BIM services employed. In summary, North America, Europe, Oceania, and Asia were advancing quickly toward the realize stage of BIM.

Keywords :

BIM adoption , Hype Cycle model , challenges of adopting , adoption failure , BIM services

References :

[1]    Berlo, L. V., Dijkmans, T., Hendriks, H., Spekkink, D., and Pel, W. (2012). “BIM QuickScan: benchmark of BIM performance in the Netherlands.” Proc., Proceedings of the CIB W78 2012: 29th International Conference.

[2]    Eadie, R., Browne, M., Odeyinky, H., McKeown, C., and McNiffb, S. (2013). “BIM Application throughout the UK construction project lifecycle: An analysis.” Automation in Construction, vol. 36, pp. 145-151.

[3]    Kassem, M., Succar, B., and Dawood, N. (2013). “A proposed approach to comparing the BIM realization of countries.” Proc., Poceedings of the CIB W78 2013: 30th International Conference - Beijing, China, 9-12 October.

[4]    Succar, B. (2009). “Building information modelling framework: A research and delivery foundation for industry stakeholders.” Automation in Construction, vol. 18, issue. 3, pp. 357-375.

[5]    Young, N. W., Jr., Jones, S. A., and Bernstein, H. M. (2007). “Interoperability in the Construction Industry.” SmartMarket Report, McGraw Hill Construction, Bedford, MA, pp. 36.

[6]    Jr., N. W. Y., Jones, S. A., Bernstein, H. M., and Gudgel, J. E. (2009). “The Business Value of BIM.” SmartMarket Report, McGraw Hill Construction, Bedford, MA, pp. 52.

[7]    Bernstein, H. M., Jones, S. A., Gudgel, J. E., Messina, F., Partyka, D., Lorenz, A., Buckley, B., Fitch, E., Laquidara, D., and Gilmore, D. (2010). “The Business Value of BIM in Europe.” SmartMarket Report, McGraw Hill Construction.

[8]    Lee. G., Lee, J., Jones, S. A., Uhm, M., Won, J., Ham, S., and Park, Y. (2012). “The Business Value of BIM in South Korea.” SmartMarket Report, McGraw Hill Construction, Bedford, MA, pp. 60.

[9]    Arayici, Y. et al., 2011. BIM adoption and implementation for architectural practices.

[10] Arayici, Y., Egbu, C. and Coates P. 2012. Building Information Modelling (BIM)

[11] Implementation and Remote Construction Projects: Issues, Challenges, and Critiques. Journal of Information Technology in Construction. Vol. 17 pp. 80-90. ISSN 1874-4753.

[12] Azhar, . S., 2011. Building Information Modeling (BIM): Trends, Benefits,Risks, And

[13] Challenges For The AEC Industry. Leadership and management in engineering, 3(11), pp. 241-252.

[14] Azhar, S., Khalfan, M. & Maqsood, . T., 2015.

[15] Building information modelling (BIM): now

[16] and beyond. Construction Economics and Building, 4(12), pp. 15-28.

[17] Banawi, A., 2017, July. Barriers to Implement Building Information Modeling (BIM) in Public

[18] Projects in Saudi Arabia. In International Conference on Applied Human Factors and Ergonomics (pp. 119-125). Springer, Cham.

[19] Barrinton, S. (2010). Guide to BIM. [ebook] Barrington Architecture & Design Ltd. Available

[20] at:https://issuu.com/barringtonarch/docs/barringtonguidetobim [Accessed 10 Aug. 2018].

[21] Elodie Hochscheid,University of Lorraine,  A model to approach BIM adoption process and possible BIM implementation failures

[22] Namcheol Jung and Ghang Lee , Changes in the BIM Service Provision of Top BIM Companies: A Five-Year Longitudinal Study, 34th International Symposium on Automation and Robotics in Construction (ISARC 2017)

[23] Wooyoung Jung,Ghang lee ,The Status of BIM Adoption on Six Continents, World Academy of Science, Engineering and Technology.

[24] International Journal of Civil and Environmental Engineering Vol:9, No:5, 2015

[25] Elmualim, A. & Gilder, J., 2014. BIM: innovation in design management, influence and

[26] challenges of implementation. Architectural Engineering and design management, 10((3-4)), pp. 183-199.

[27] Shaban, M., 2017, November. Prospects for using BIM in the reconstruction of Syria.

[28] BIMArabia Magazine. (25).

[29] Sonia Ahmed , Petr DlasK , Omar Selim , Ashraf Elhendawi, BIM Performance Improvement Framework for Syrian AEC Companies, International Journal of BIM and Engineering Science, Vol. 1 , No. 1 , pp. 20-41 , 2018 (Doi   :  https://doi.org/10.54216/IJBES.010102)

[30] Mohamed H. Shaban , Ashraf Elhendawi, Building Information Modeling in Syria: Obstacles and Requirements for Implementation, International Journal of BIM and Engineering Science, Vol. 1 , No. 1 , pp. 42-64 , 2018 (Doi   :  https://doi.org/10.54216/IJBES.010103)

[31] Ahmed, S., Dlask, P., Shaban, S. and Selim, O., 2018 ”Possibility of applying BM in Syrian building projects, engineering for rural development Jelgava, 23.-25.05.2018”.

[32] Nor’Aini Yusof , Siti Salwa Mohd Ishak , Rahma Doheim, An Exploratory Study of Building Information Modelling Maturity in the Construction Industry, International Journal of BIM and Engineering Science, Vol. 1 , No. 1 , pp. 6-19 , 2018 (Doi   :  https://doi.org/10.54216/IJBES.010101)

[33] Ashraf Elhendawi , Andrew Smith , Emad Elbeltagi, Methodology for BIM implementation in the Kingdom of Saudi Arabia, International Journal of BIM and Engineering Science, Vol. 2 , No. 1 , pp. 01-20 , 2019 (Doi   :  https://doi.org/10.54216/IJBES.020101)

[34] Mansur Hamma-adama , Tahar Kouider , Huda Salman, Analysis of Barriers and Drivers for BIM Adoption, International Journal of BIM and Engineering Science, Vol. 3 , issue 1 , pp. 18-41 , 2020 (Doi   :  https://doi.org/10.54216/IJBES.030102)

[35]                         Elhendawi, A.I.N., 2018. Methodology for BIM implementation in KSA in AEC industry. Master of Science MSc in Construction Project Management), Edinburgh Napier University, UK.

[36] Elhendawi, A., Omar, H., Elbeltagi, E. and Smith, A., 2019. Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science, 2(2), pp.1-22.

[37] Evans, M., Farrell, P., Elbeltagi, E., Mashali, A. and Elhendawi, A., 2020. Influence of partnering agreements associated with bim adoption on stakeholder's behaviour in construction mega-projects. International Journal of BIM and Engineering Science, 3(1), pp.1-20.

 

[38] Elgendi, A.F., Elhendawi, A., Youssef, W.M.M. and Darwish, A.S., 2021. The Vulnerability of the Construction Ergonomics to Covid-19 and Its Probability Impact in Combating the Virus. International Journal, 4(1), pp.01-19


Cite this Article as :
Style #
MLA Raghad Safour , Sonia Ahmed , Bilal Zaarour. "BIM Adoption around the World." International Journal of BIM and Engineering Science, Vol. 4, No. 2, 2021 ,PP. 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)
APA Raghad Safour , Sonia Ahmed , Bilal Zaarour. (2021). BIM Adoption around the World. Journal of International Journal of BIM and Engineering Science, 4 ( 2 ), 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)
Chicago Raghad Safour , Sonia Ahmed , Bilal Zaarour. "BIM Adoption around the World." Journal of International Journal of BIM and Engineering Science, 4 no. 2 (2021): 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)
Harvard Raghad Safour , Sonia Ahmed , Bilal Zaarour. (2021). BIM Adoption around the World. Journal of International Journal of BIM and Engineering Science, 4 ( 2 ), 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)
Vancouver Raghad Safour , Sonia Ahmed , Bilal Zaarour. BIM Adoption around the World. Journal of International Journal of BIM and Engineering Science, (2021); 4 ( 2 ): 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)
IEEE Raghad Safour, Sonia Ahmed, Bilal Zaarour, BIM Adoption around the World, Journal of International Journal of BIM and Engineering Science, Vol. 4 , No. 2 , (2021) : 31-44 (Doi   :  https://doi.org/10.54216/IJBES.040203)