1
Department of Construction Management and Engineering, North Dakota State University, Fargo, ND, USA
(abanawi@ndsu.edu)
2
College of Environmental Design, King Abdulaziz University, Jeddah, Saudi Arabia
(oalgebali@stu.kau.edu.sa)
3
Department of Construction Management and Engineering, North Dakota State University, Fargo, ND, USA
(cyril.ahiable@ndsu.edu)
Abstract :
The building sector influences the Gross Domestic Product (GDP) of many countries. There is a vast amount of waste generated in the building process, with many projects suffering from delivery delays, running over budget, and resulting in buildings of minimal quality. Building Information Modeling (BIM) has shown great potential towards solving these problems. BIM sets frameworks for Architects, Engineers, and Contractors (AEC), enhancing management of the building process. This paper analyzes select framework methods, tools, and processes, identifying key guidelines required to create a BIM framework customized to local requirements; this will have a positive effect on the construction industry by lowering the cost of buildings and improving the communication among parties, and leading to the development of frameworks based on local indicators. A comprehensive literature review was conducted to determine components and factors from structure frameworks with the main findings then classified and categorized into the following sectors -- government support, maturity level measurement, standards, protocol, database, and education plan. This permits the development of a comparison highlighting the frameworks’ differences and summing up possible strategies for BIM implementation on several bases, such as region differentiation and the local industries’ Political, Economic, Socio-Cultural, Technological (PEST) aspects, allowing for greater understanding of BIM implementation on various scales. The selection of the BIM frameworks was dependent on specific criteria with a minimum score of 4 out of 5 required to merit inclusion. Three strategies for the creation of a BIM framework were discovered and were seen to vary across regions. The discovery of these strategies lays the groundwork for future research into the development of these frameworks to determine the potential advantages and downsides of each.
Keywords :
BIM , Frameworks , Implementation , adoption
References :
[1]. ACIF, A. (2014). "A Framework for the Adoption of Project Team Integration and Building Information Modelling". In. Australia: The Australian Construction Industry Forum and Australasia Procurement and Construction Council.
[2]. Alhumayn, S., Chinyio, E., & Ndekugri, I. (2017(. "The barriers and strategies of implementing bim in saudi arabia". WIT Transactions on The Built Environment.
[3]. Allan Fred, O. (2016). "Interaction between Lean Construction and BIM: How effectiveness in production can be improved if lean and BIM are combined in the design phase A literature review". In.
[4]. Alreshidi, E., Mourshed, M., & Rezgui, Y. (2015). "Cloud-based BIM governance platform requirements and specifications: software engineering approach using BPMN and UML". Journal of Computing in Civil Engineering.
[5]. Alreshidi, E., Mourshed, M., & Rezgui, Y. (2017). "Factors for effective BIM governance". Journal of Building Engineering.
[6]. Azhar, S. (2011). "Building information modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry". Leadership and management in engineering.
[7]. Banawi, A. (2017). "Barriers to Implement Building Information Modeling (BIM) in Public Projects in Saudi Arabia". The International Conference on Applied Human Factors and Ergonomics.
[8]. Banawi, A., & Bilec, M. M. (2014). "A framework to improve construction processes: Integrating Lean, Green and Six Sigma". International Journal of Construction Management.
[9]. Bui, N., Merschbrock, C., & Munkvold, B. E. (2016). "A Review of Building Information Modelling for Construction in Developing Countries". Procedia Engineering.
[10]. Building Information Modeling (BIM) Implementation Plan. (2015). In: Scottish futures Trust.
[11]. Cabinet Office, U. (2011). Government construction strategy. In: Cabinet Office London.
[12]. CIC Building Information Modelling Standards (phase One). (2015). In: Construction Industry Council.
[13]. Committee, B. I. M. S. (2013). BIM Essential Guide For BIM Adoption in an Organization. In.
[14]. Dania, A. A., Kehinde, J. O., & Bala, K. A study of construction material waste management practices by construction firms in Nigeria.
[15]. Eastman, C. M., Eastman, C., Teicholz, P., & Sacks, R. (2011). BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors. John Wiley & Sons.
[16]. Economics, I. (2013). Global construction outlook: executive outlook. IHS Economics: London, UK.
[17]. Finland, B. (2012a). COBIM-Common BIM Requirements 2012 Series 1: General Requirements. Cobim: Common BIM Requirements, 1.
[18]. Finland, B. (2012b). COBIM-Common BIM Requirements 2012 Series 2-Modeling of the starting situation. Cobim: Common BIM Requirements, 2.
[19]. Finland, B. (2012c). COBIM-Common BIM Requirements 2012 Series 13: Use of models in construction. Cobim: Common BIM Requirements, 2.
[20]. GSA, U. (2007). GSA: BIM Guide Overview. In: General Services Administration Washington, DC.
[21]. Hany, O. (2015). Solutions for the UAE Architecture, Engineering, and Construction (AEC) industry to mandate Building Information Modeling (BIM). In.
[22]. Hoornweg, D., & Bhada-Tata, P. (2012). What a waste: a global review of solid waste management (Vol. 15): World Bank, Washington, DC.
[23]. Latiffi, A. A., Mohd, S., Kasim, N., & Fathi, M. S. (2013). Building Information Modeling (BIM) Application in Malaysian Construction Industry. International Journal of Construction Engineering and Management.
[24]. McAuley, B. (2017). BICP Global BIM Study - Lessons for Ireland’s BIM Programme.
McAuley, B., Hore, A., & West, R. (2017). BICP Global BIM Study - Lessons for Ireland’s BIM Programme.
[25]. Mehran, D. (2016). "Exploring the Adoption of BIM in the UAE construction industry for AEC firms". Elsevier Ltd.
[26].NATSPEC. (2011). NATSPEC National BIM Guide. Construction Information Systems Limited.
[27]. Region, T. G. o. t. H. K. S. A. (2009). Building Information Modelling (BIM) Standards Manual for development and Construction Division of Hong Kong Housing Authority. China
[28].Roadmap to Lifecycle BIM | buildingSMART Canada. Retrieved from https://www.buildingsmartcanada.ca/roadmap-to-lifecycle-bim/ Retrieved from files/176/roadmap-to-lifecycle-bim.html
[29].Schlueter, A., & Thesseling, F. (2009). Building information model based energy/exergy performance assessment in early design stages. Automation in Construction.
[30]. Sinclair, D. (2012). BIM Overlay to Plan of Work 2013 | Building Information Modeling. RIBA Publishing Retrieved from https://www.scribd.com/document/188293181/BIM-Overlay-to-Plan-of-Work-2013 Retrieved from files/86/BIM-Overlay-to-Plan-of-Work-2013.html
[31]. Sinclair, D. (2012)." BIM overlay to the RIBA outline plan of work". RIBA.
[32]. Statsbygg. (2013). Statsbygg BIM manual. Norway
[33]. Succar, B., Sher, W., & Williams, A. (2012). "Measuring BIM performance: Five metrics". Architectural Engineering and Design Management.
[34].USGSA, G. (2007). BIM Guide Overview.The National 3D-4D-BIM Program Office of the Chief Architect, Public Buildings Service, US General Services Administration.
[35]. Wong, A., Wong, F. K., & Nadeem, A. (2009). "Comparative roles of major stakeholders for the implementation of BIM in various countries". The International Conference on Changing Roles: New Roles, New Challenges, Noordwijk Aan Zee, The Netherlands.
[36]. Wong, A. K. D., Wong, F. K. W., & Nadeem, A. (2011). "Government roles in implementing building information modelling systems: Comparison between Hong Kong and the United States". Construction Innovation,11.
[37]. Yuan, Y., & Yuan, J. (2011). "The theory and framework of integration design of building consumption efficiency based on BIM. Procedia Engineering.
| Style | # |
|---|---|
| MLA | Abdulaziz Banawi , Obaid Aljobaly , Cyril Ahiable. "A Comparative Review of Building Information Modeling Frameworks." International Journal of BIM and Engineering Science, Vol. 2, No. 2, 2019 ,PP. 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |
| APA | Abdulaziz Banawi , Obaid Aljobaly , Cyril Ahiable. (2019). A Comparative Review of Building Information Modeling Frameworks. Journal of International Journal of BIM and Engineering Science, 2 ( 2 ), 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |
| Chicago | Abdulaziz Banawi , Obaid Aljobaly , Cyril Ahiable. "A Comparative Review of Building Information Modeling Frameworks." Journal of International Journal of BIM and Engineering Science, 2 no. 2 (2019): 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |
| Harvard | Abdulaziz Banawi , Obaid Aljobaly , Cyril Ahiable. (2019). A Comparative Review of Building Information Modeling Frameworks. Journal of International Journal of BIM and Engineering Science, 2 ( 2 ), 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |
| Vancouver | Abdulaziz Banawi , Obaid Aljobaly , Cyril Ahiable. A Comparative Review of Building Information Modeling Frameworks. Journal of International Journal of BIM and Engineering Science, (2019); 2 ( 2 ): 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |
| IEEE | Abdulaziz Banawi, Obaid Aljobaly, Cyril Ahiable, A Comparative Review of Building Information Modeling Frameworks, Journal of International Journal of BIM and Engineering Science, Vol. 2 , No. 2 , (2019) : 23-48 (Doi : https://doi.org/10.54216/IJBES.020202) |