International Journal of BIM and Engineering Science

Journal DOI

https://doi.org/10.54216/IJBES

Submit Your Paper

2571-1075ISSN (Online)

Volume 4 , Issue 2 , PP: 64-78, 2021 | Cite this article as | XML | Html | PDF | Full Length Article

COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE

Eisa Al Hammoud 1 *

  • 1 Master student at the Building Information Modeling and Management BIMM program – Syrian Virtual University, Teacher Assistant at Al Baath University - (eisa_161270@svuonline.org)
  • Doi: https://doi.org/10.54216/IJBES.040204

    Abstract

    BIM (Building Information Modeling) is an old-new and ever evolving concept, technology, and method of construction, it’s been a while since BIM obligated itself as a necessity not just a luxury, due to the massive benefits it had brought to the AEC industry. BIM is in a constant phase of evolvement and maturity with new ideas and elements being brought up to the table each day, and thus; the BIM level in each project and/or country is in a different level depending on specific factors. In this research we will take a closer look on various countries’ experiences in BIM and what maturity level each one of them have reached, what are the major obstacles standing in the way of Adopting BIM Technology and how to avoid them, with some examples and statistics to enrich the content, and at the end, and after exploring the most possible number of examples around the globe, we will be looking exclusively on the Middle Eastern region’s experience in implementing BIM and then dive deeper to the Syrian current BIM Status, and why Syria is still falling behind in this criteria, how to develop this technology in the future within the nation, what had been done so far to encourage the usage of this technology, and what benefits would it bring to the Syrian Construction and Financial Industry especially under the current circumstances and during the upcoming phase of reconstructing the devastated areas.

    Keywords :

    BIM Adoption, BIM Implementation, BIM Around the World.

    References

    [1]    British Standards Institution, BS EN ISO 19650: Organisation and digitization of information about buildings and civil engineering works, including building information modelling”,BSI,London,UK, 2019.

     [2]  Mc Partland, Richard, what is a federated Building information modelling, NBS: Knowledge,NBS retrieved 26th , May,2020, London, UK, September 11th, 2017

     [3]  Diensen, Betzy, IFC4 poised for wider reach as ISO 16739 launched, IFC4 Special, BuildingSmart, International, March 2013

    [4]  Waterhouse, Richard, National BIM Report 2017, RIBA Enterprise Ltd, 2017

    [5]   Hazem, Zeina, BIM Adoption in the UK- History and Impact, Planradar2021.com, November 2nd, 2020.

    [6]  Shimonti, Paul, BIM Adoption around the World: how good are we? , Geospatial World, December2018

    [7]  United BIM, BIM Adoption in the AEC Industry- Benefits, Barriers, Common Mistakes and Focus Areas of Success, United BIM, May, 14th, 2019

     

    [8]  Steers, Sam, Which Countries Are Leading the Adoption of BIM?, Construction Global, June, 24th, 2021 Issue.

    [9]  Davies, R, Crespin-Mazet, F, Linné, Å, Pardo, C, Havenvid, M I, Harty, C, Ivory, C and Salle, R (2015) BIM in Europe: Innovation networks in the construction sectors of Sweden, France and the UK In:

    [10] Raidén, A B and Aboagye-Nimo, E (Eds) Procs 31st Annual ARCOM Conference, Lincoln, UK 7-9 September 2015.

    [11] Smith. Peters, BIM Implementation, Global Strategies Creative Construction Conference 2014, University of Technology, Sydney, Australia, Procedia Engineering 85(2014) p482-492.

    [12] Re Cecconi. Fluvio, Building Information Modeling in Italy, ABC Department Politecnico Milano, 2014.

    [13] Santos, Ruben, A Costa. Antonio, Girlo. Antonio, Biblometric Analysis and Review of Building Information Modeling, Literature Published between 2005 and 2015.” Automation in Construction. https://doi.org/10.1016/j.autcon.2017.03.005

    [14] EU BIM Task Group, Handbook for the Introduction of Building Information Modelling, European Public Sector, 2017.

    [15] Kaneta. Takashi, Fursaka.Shuzo, Tamura. Atsushi, Deng. Nesi, Overview of bim implementation in Singapore and Japan Article in Journal of Civil Engineering and Architecture · December 2016, DOI: 10.17265/1934-7359/2016.12.001

    [16] BIM Particular Conditions, Singapore BIM Guide2012 ,BCA, Singapore, Version2, June 15, 2016. https://www.corenet.gov.sg/media/

    [17] Kaneta. Takashi, Furusaka. Shuzo, Deng.Nisi, Overview and problems of BIM Implementation in Japan,Higher Education Press, Front Eng Manag.2017,4920: 146-155, DOI 10.15302/J-FEM-2017007.

    [18] L. Zhang, G. Wang, T. Chen, and G. He, Proceedings of the 17th International Symposium on Advancement of Construction Management and Real Estate, (2014), pp. 969–979

    [19] H. S. Jayasena, C. Weddikkara, World Construction Conference 2012 – Global Challenges in Construction Industry, (2012), no. June, pp. 196–202.

    [20] F. A. Wilis, D. Larasati, Suhendri, Int. J. Archit. Environ. Eng., vol. 4, no. 3, 2017

     

    [21] R. Ruthankoon, Proceedings of Narotama International Conference on Civil Engineering 2015, (2015), pp. 13–14.

    [22] P. Janssen, P. Loh, A. Raonic, M. A. Schnabel, BIM AND PUBLIC ADMINISTRATION The Brazilian Case of Sao Paulo, Brazil; Federal Institute of Education, Science and Technology of Sao Paulo, Brazil, the 22nd International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA) 2017, 189-199. © 2017, The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Hong Kong.

    [23] Gajendran. Thayaparan, Brewer. Graham, Building Information Modelling (BIM): Australian Perspectives and Adoption Trends, University of Newcastle, CIBER center for interdisciplinary built environment research, Newcastle, Australia, Technical Report · September 2012.

    [24]  Nechaeva. Irina, Project Management Development – Practice and Perspectives, Fifth International Scientific Conference on Project Management in the Baltic Countries, Riga, University of Latvia

    [25] April 14-15, 2016.

    [26] A.Jones. Stephen, Loquidara-Carr. Donna, Exploring the Adoption of BIM in UAE Construction Industry for AEC Firms, Dodge Data Analytics Magazine- 2017

     

    [27] www.construction.com.

    [28] S. Azhar, M. Khalfan, and T. Maqsood, Building Information Modeling (BIM): Now and beyond, Australas. J. Constr. Econ. Build., vol. 12, no. 4, pp. 15-28, 2012. 

    [29] S. Al-Hammad, An investigation into current tendering process in Saudi construction projects, British Columbia, Proceedings of the 5th international/11th Construction Specialty Conference, Vancouver, vol. 12, 2015

    [30] Elhendawi.Ashraf, Smith. Andrew, Elbeltagi. Methodology for BIM implementation in the Kingdom of Saudi Arabia, International Journal of BIM and Engineering Science, Vol. 2 , No. 1 , pp. 01-20 , 2019 (Doi   :  https://doi.org/10.54216/IJBES.020101) 

    [31] Mehran. D, Exploring the Adoption of BIM in the UAE construction industry for AEC Firms, Procedia Engineering 145110-1118. (2016).

     

    [32]  Venkatachalan. Senthikumar, An Exploratory Study on Building Information Modelling Adoption in United Arab Emirates Municipal Projects- Current Status and Challenges, University of Sharja, United Arab Emirates, Web of Conferences 120,02015,(2017)

    [33] Ahmed. Sonia, Dlask. Petr, Shaaban. Mohammed, Selim. Omar, Possibility of Applying BIM in Syrian Building Projects Conference Paper, www.researchgate.com, May 2018.

    [34]  H. Shaban. Mohamed, Elhendawi. Ashraf, Building Information Modeling in Syria: Obstacles and Requirements for Implementation, International Journal of BIM and Engineering Science ISSN 2571-1075

    [35]  Ahmed. Sonia, DlasK .Petr, Selim. Omar, Elhendawi. Ashraf, BIM Performance Improvement Framework for Syrian AEC Companies, International Journal of BIM and Engineering Science, Vol. 1 , No. 1 , pp. 20-41 , 2018 (Doi   :  https://doi.org/10.54216/IJBES.

    [36]  Elhendawi, A.I.N., 2018. Methodology for BIM implementation in KSA in AEC industry. Master of Science MSc in Construction Project Management), Edinburgh Napier University, UK.

    [37]  Elhendawi, A., Omar, H., Elbeltagi, E. and Smith, A., 2019. Practical approach for paving the way to motivate BIM non-users to adopt BIM. International Journal of BIM and Engineering Science, 2(2), pp.1-22.

    [38]  Evans, M., Farrell, P., Elbeltagi, E., Mashali, A. and Elhendawi, A., 2020. Influence of partnering agreements associated with bim adoption on stakeholder's behaviour in construction mega-projects. International Journal of BIM and Engineering Science, 3(1), pp.1-20.

    [39]  Elgendi, A.F., Elhendawi, A., Youssef, W.M.M. and Darwish, A.S., 2021. The Vulnerability of the Construction Ergonomics to Covid-19 and Its Probability Impact in Combating the Virus. International Journal, 4(1), pp.01-19

    Cite This Article As :
    Al, Eisa. COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE. International Journal of BIM and Engineering Science, vol. , no. , 2021, pp. 64-78. DOI: https://doi.org/10.54216/IJBES.040204
    Al, E. (2021). COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE. International Journal of BIM and Engineering Science, (), 64-78. DOI: https://doi.org/10.54216/IJBES.040204
    Al, Eisa. COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE. International Journal of BIM and Engineering Science , no. (2021): 64-78. DOI: https://doi.org/10.54216/IJBES.040204
    Al, E. (2021) . COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE. International Journal of BIM and Engineering Science , () , 64-78 . DOI: https://doi.org/10.54216/IJBES.040204
    Al E. [2021]. COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE. International Journal of BIM and Engineering Science. (): 64-78. DOI: https://doi.org/10.54216/IJBES.040204
    Al, E. "COMPARING BIM ADOPTION AROUND THE WORLD, SYRIA’S CURRENT STATUS AND FURTURE," International Journal of BIM and Engineering Science, vol. , no. , pp. 64-78, 2021. DOI: https://doi.org/10.54216/IJBES.040204