2571-1075ISSN (Online)
Volume 8 , Issue 1 , PP: 08-17, 2024 | Cite this article as | XML | Html | PDF | Full Length Article
Haretha Aljabr 1 * , Mohammed Ali 2
Doi: https://doi.org/10.54216/IJBES.080101
The construction industry has witnessed significant technological advancements in recent years, with Building Information Modelling (BIM) emerging as a pivotal innovation. BIM's integration with Project Management (PM) is recognized as a transformative approach that can potentially enhance efficiency, accuracy, and collaboration within the Architecture, Engineering, and Construction (AEC) industry. This paper explores the integration of BIM and PM, focusing on identifying the challenges and benefits inherent in this convergence. The primary aim is to understand how the synergistic use of BIM and PM can be optimized to improve project outcomes in the construction sector. As the industry evolves, understanding these dynamics becomes crucial for stakeholders aiming to leverage technological advancements for optimal project delivery. The research problem central to this study stems from the observed gaps and challenges in effectively integrating BIM with PM practices. While BIM offers a multidimensional, collaborative framework for construction projects, its full potential is often unrealized due to various implementation challenges. These challenges include technical issues, lack of standardization, and resistance to change within organizational cultures. Recognizing the importance of this integration, the study sets out to answer key research questions revolving around the current state of BIM and PM integration, the main challenges faced, and the potential strategies for effective implementation. The objectives include a detailed analysis of the current practices in BIM implementation, identification of the barriers to effective integration, and proposing a framework that can enhance the synergy between BIM and PM. The methodology employed in this research involves a comprehensive literature review, followed by a survey-based approach to gather data from industry professionals. This data provides insights into the practical aspects of BIM and PM integration and helps in identifying the key factors that influence project success in the context of this integration. This paper contributes to the existing body of knowledge by providing a nuanced understanding of the complexities and potential of integrating BIM and PM. It aims to offer a strategic framework that can guide practitioners and stakeholders in effectively navigating the challenges and leveraging the benefits of this integration for enhanced project performance in the AEC industry.
project management , integration , building information modeling , AEC , construction project.
[1] S. Ahmed, P. Dlask, O. Selim and A. Elhendawi, "BIM Performance Improvement Framework for Syrian" International Journal of BIM and Engineering Science, vol. 1, no. 1, pp. 21-41, 2018.
[2] M. Evans, P. Farrell, E. Elbeltagi, A. Mashali and A. Elhendawi, "Influence of partnering agreements associated with BIM adoption on stakeholder's behaviour in construction mega-projects" International Journal of BIM and Engineering Science, vol. 3, no. 1, pp. 1-20, 2020.
[3] M. H. Shaban and A. Elhendawi, "Building Information Modeling in Syria: Obstacles and requirements for implementation" International Journal of BIM and Engineering Science, vol. 1, no. 2, pp. 42-64, 2018.
[4] N. Roumieh and S. Ahmed, "Adopting Risk Management Professional Methodologies as an Effective Strategy to Protect Heritage Sites in Syria" International Journal of BIM and Engineering Science, vol. 5, no. 1, pp. 61-72, 2022.
[5] H. Salami and K. Alothman, "Engineering Training and its Importance for Building" International Journal of BIM and Engineering Science, vol. 5, no. 1, pp. 41-60, 2022.
[6] L. Raad , . M. Rana and P. Dlask, “Incorporating BIM into the Academic Curricula of Faculties of Architecture within the Framework of Standards for Engineering Education,” International Journal of BIM and Engineering Science, pp. 8-28, 2023.
[7] A. Amino and S. Ahmed, “Proposing a methodology to measure and develop BIM maturity in Syria,” International Journal of BIM and Engineering Science, pp. 5(1), 73-89, 2022.
[8] A. Elhendawi, A. Smith and E. Elbeltagi, "Methodology for BIM implementation in the Kingdom of Saudi Arabia" International Journal of BIM and Engineering Science, vol. 2, no. 1, 2019.
[9] A. Elhendawi, H. Omar, E. Elbeltagi and A. Smith, "Practical approach for paving the way to motivate BIM non-users to adopt BIM" International Journal of BIM and Engineering Science, vol. 2, no. 2, 2020.
[10] M. Saada and H. Aslan, "The effectiveness of applying BIM in increasing the accuracy of estimating quantities for public facilities rehabilitation projects in Syria after the war" International Journal of BIM and Engineering Science, vol. 5, no. 2, pp. 08-18, 2022.
[11] R. D, . M. R and . L. N, “Quality Assurance of Construction Design and Contractual Phases in Syria Within BIM Environment: A Case study.,” International Journal of BIM and Engineering Science (IJBES), Vols. Vol. 06, No. 02, PP, pp. 55-73, 2023.
[12] T. Salamah, A. Shibani and K. Alothman, “Improving AEC Project Performance in Syria Through the Integration of Earned Value Management System and Building Information Modelling: A Case Study.,” International Journal of BIM and Engineering Science, Vols. Vol. 06, No. 01, PP, pp. 74-95, 2023.
[13] S. S. M. Ishak and . R. Doheim, “An exploratory study of building information modelling maturity in the construction industry,” International Journal of BIM and Engineering Science, pp. 1(1), 19, 2021.
[14] S. Ahmed, S, P. Dlask and B. Hassan, “Improvement and Innovation in the Management of Change Orders13(19), 7975-7979.,” Journal of Engineering and Applied Sciences, pp. 13(19), 7975-7979., 2018.
[15] N. Lepkova, R. Maya, S. Ahmed and V. Šarka, “BIM implementation maturity level and proposed approach for the upgrade in Lithuania,” International Journal of BIM and Engineering Science, vol. 2(1), pp. 22-38, 2019.
[16] E. Al Hammoud, “Comparing Bim Adoption Around the World, Syria’s Current Status and Furture,” International Journal of BIM and Engineering Science, vol. 4, pp. 64-78, 2021.
[17] Tan, Seda & Gümüşburun Ayalp, Gülden & Metinal, Yusuf. (2022). Critical Challenges of BIM Implementation in AEC Industry in Turkey.
[18] Ern, P. A. S., Yang, W. X., Kasim, N., Osman, M. H., Adnan, S. H., Natasha, N. S., & Ali, R. (2022, May). Building information modelling (BIM) in Malaysian industrialised building system (IBS) construction projects: benefits and challenges. In IOP Conference Series: Earth and Environmental Science (Vol. 1022, No. 1, p. 012020). IOP Publishing.
[19] Jang, R., & Collinge, W. (2020). Improving BIM asset and facilities management processes: A Mechanical and Electrical (M&E) contractor perspective. Journal of Building Engineering, 32, 101540.
[20] Meng, Q., Zhang, Y., Li, Z., Shi, W., Wang, J., Sun, Y., ... & Wang, X. (2020). A review of integrated applications of BIM and related technologies in whole building life cycle. Engineering, Construction and Architectural Management, 27(8), 1647-1677.
[21] Sampaio, A. Z. (2022). Project management in office: BIM implementation. Procedia Computer Science, 196, 840-847.
[22] Shaqour, E. N. (2022). The role of implementing BIM applications in enhancing project management knowledge areas in Egypt. Ain Shams Engineering Journal, 13(1), 101509.
[23] Du, X. (2021). Research on engineering project management method based on BIM technology. Scientific Programming, 2021, 1-10.
[24] Li, Y. (2022). Application of BIM in Architectural Design, Project Construction, and Project Management. Journal of World Architecture, 6(3), 1-6.
[25] Guo, N., & Liao, T. (2023). Research on the Application of BIM Technology in Construction Projects. Journal of Civil Engineering and Urban Planning, 5(6), 57-62.
[26] Zongya Li. Research on the Application of BIM Technology in Construction Project Management. Academic Journal of Architecture and Geotechnical Engineering (2023) Vol. 5, Issue 4: 54-59.
[27] Guo, X., Tian, C., Xiao, J., Chen, Y., & Zhang, J. (2021). Life Cycle Integration of Building Information Modeling in Infrastructure Projects.
[28] Hyarat, E., Hyarat, T., & Al Kuisi, M. (2022). Barriers to the implementation of building information modeling among Jordanian AEC companies. Buildings, 12(2), 150.
[29] Rae, D., Gledson, B., & Littlemore, M. (2019). BIM and its impact upon project success outcomes from a Facilities Management perspective.
[30] Darwish, A. M., Tantawy, M. M., & Elbeltagi, E. (2020). Critical success factors for BIM implementation in construction projects. Saudi Journal of Civil Engineering, 4(9), 180-191.
[31] Durdyev, S., Mbachu, J., Thurnell, D., Zhao, L., & Hosseini, M. R. (2021). BIM adoption in the Cambodian construction industry: key drivers and barriers. ISPRS International Journal of Geo-Information, 10(4), 215.
[32] Disney, O., Roupé, M., Johansson, M., & Domenico Leto, A. (2022). Embracing BIM in its totality: a Total BIM case study. Smart and Sustainable Built Environment.
[33] Datta, S. D., Sobuz, M. H. R., Mim, N. J., & Nath, A. D. (2023). Investigation on the effectiveness of using building information modeling (BIM) tools in project management: a case study. Revista de la construcción, 22(2), 306-320.
[34] Elhendawi, A.I.N., 2018. Methodology for BIM Implementation in KSA in AEC Industry. Master of Science MSc in Construction Project Management), Edinburgh Napier University, UK
[35] Ahmed Fahim Elgendi, Ashraf Elhendawi, Waleed Mahfouz M. A. Youssef, Abdul Salam Darwish. (2021). The Vulnerability of the Construction Ergonomics to Covid-19 and Its Probability Impact in Combating the Virus. Journal of International Journal of BIM and Engineering Science, 4 (1), 01-17 (Doi : https://doi.org/10.54216/IJBES.040101)
[36] Saleh, Fawaz, Elhendawi, Ashraf, Darwish, Abdul Salam, Farrel, Peter: An ICT-based Framework for Innovative Integration between BIM and Lean Practices Obtaining Smart Sustainable Cities, Article, International Journal of BIM and Engineering Science (IJBES), vol 14, p68.
[37] Fawaz Saleh, Ashraf Elhendawi, Abdul Salam Darwish, Peter Farrell. (2024). A Framework for Leveraging the Incorporation of AI, BIM, and IoT to Achieve Smart Sustainable Cities. Journal of Journal of Intelligent Systems and Internet of Things, 11 (2), 75-84 (Doi: https://doi.org/10.54216/JISIoT.110207)
