Volume 5 , Issue 1 , PP: 22-35, 2022 | Cite this article as | XML | Html | PDF | Full Length Article
Vijay K. Trivedi 1 *
Doi: https://doi.org/10.54216/IJWAC.050102
The current wireless and communication system may be attributed to the contributions made by the Sensor Network in a significant measure. During the last decade, several efforts have been performed to examine and propose answers to challenges about the energy efficiency of wireless sensor network communications. Several different researchers has done these efforts. The challenge of constructing economical energy-use paths has not yet been overcome. Because sensors have limited computational capabilities, which are frequently coupled with energy limitations, it is rather difficult to guarantee that a sensor’s lifespan will be longer. This is because of the energy constraints often associated with these limitations. The results of this research have led to the development of a one-of-a-kind communication system for sensor networks that is not only environmentally friendly but also supported by three distinct revolutionary frameworks. The framework that has been recommended, which goes by the name Potential Energy Efficient Data Fusion (PEE-DF), is the one that is in charge of the optimization of energy. It achieves this with the aid of probabilistic approaches and clustering. The K-SOM (Korhonen self-organizing map) framework was designed using a globular topology, which aids load balancing during data fusion. K-SOM stands for "Korhonen self-organizing map." This was done to ensure we got the most out of our resources. A novel method to routing is presented by the technique, which has the potential to be used to assist in the operation of energy-efficient routing in large-scale wireless sensor networks. The framework for the Tree-Based Fusion Technique (TBFT), which has been offered, comes up with a new way for dynamic reconfiguration. This is accomplished via the introduction of the concept of routing agents. The strategy enables the system to recognise which sensor has a greater energy dissipation rate and then instantly moves data fusion work to a more energy-efficient node. This allows the system to save energy. This approach, based on thresholds, enable a sensor to act as a cluster head up until it reaches its threshold remnant energy and then as a member node once it exceeds threshold residual energy. In other words, it may play both roles simultaneously. It is possible to fulfil both of these responsibilities at the same time. The findings have been mathematically modelled using a standard radio-energy model, which has enhanced the robustness of the findings, which is highly positive. The results were encouraging because of the increased robustness of the findings. Compared to the benchmark previously established for energy-efficient strategies, the proposed system demonstrates higher performance in terms of its ability to communicate while using less energy. In contrast to LEACH, the recommended system's findings reveal an almost fifty percent decrease in energy consumption, and at the same time, a reduction in the amount of time required to carry out the operation..
K-SOM (Korhonen self-organizing map) framework , Routing Protocol , Data Fusion , Tree-Based Fusion Technique , LEACH.
[1] Qasem, M., Al-Dubai, A., Romdhani, I., Ghaleb, B. and Gharibi, W. (2016), A new efficient objective function for routing in internet of things paradigm, in „2016 I Conference on Standards for Communications and Networking (CSCN)‟, I , pp. 1–6.
[2] Ray, P. P. (2018), „A survey on internet of things architectures‟, Journal of King Saud University-Computer and Information Sciences 30(3), 291–319.
[3] Sanmartin, P., Rojas, A., Fernandez, L., Avila, K., Jabba, D. and Valle, S. (2018), Sigma routing metric for rpl protocol‟, Sensors 18(4), 1277.
[4] Sanshi, S. and Jaidhar, C. (2017), „ nhanced mobility aware routing protocol for low power and lossy networks‟, Wireless Networks 25(4), 1–15.
[5] Ihnaini, B., Khan, M. A., Khan, T. A., Abbas, S., Daoud, M. S., Ahmad, M., & Khan, M. A. (2021). A smart healthcare recommendation system for multidisciplinary diabetes patients with data fusion based on deep ensemble learning. Computational Intelligence and Neuroscience, 2021.
[6] [Shu, T., Krunz, M. and Vrudhula, S. (2005), Power balanced coverage-time optimization for clustered wireless sensor networks, in „Proceedings of the 6th ACM international symposium on Mobile ad hoc networking and computing‟, ACM, pp. 111–120.
[7] Silva, B. N., Khan, M. and Han, K. (2018), „Internet of things: A comprehensive review of enabling technologies, architecture, and challenges‟, I T Technical Review 35(2), 205–220.
[8] Sneha, K. and Prasad, B. (2016), An efficient hand-off optimization based rpl routing protocol for optimal route selection in mobility enabled llns, in „2016 International Conference on Global Trends in Signal Processing, Information Computing and Communication (ICGTSPICC)‟, I , pp. 130–137.
[9] Somaa, F., El Korbi, I. and Saidane, L. A. (2017), Braided on demand multipath rpl in the mobility context, in „2017 I 31st International Conference on Advanced Information Networking and Applications (AINA)‟, I , pp. 662–669.
[10] Taghizadeh, S., Bobarshad, H. and lbiaze, H. (2018), „Clrpl: context-aware and load balancing rpl for iot networks under heavy and highly dynamic load‟, I Access 6(1), 23277–23291.
[11] Tahir, Y., Yang, S. and McCann, J. (2018), „Brpl: Backpressure rpl for high-throughput and mobile iots‟, I Transactions on Mobile Computing 17(1), 29–43.
[12] Thang, V. C. and Van Tao, N. (2016), „A performance evaluation of improved ipv6 routing protocol for wireless sensor networks‟, International Journal of Intelligent Systems and Applications 8(12), 18.
[13] Ullah, R., Faheem, Y. and Kim, B.-S. (2017), „ nergy and congestion-aware routing metric for smart grid ami networks in smart city‟, I access 5(1), 13799–13810.
[14] Urama, I. H., Fotouhi, H. and Abdellatif, M. M. (2017), Optimizing rpl objective function for mobile low-power wireless networks, in „2017 I 41st Annual Computer Software and Applications Conference (COMPSAC)‟, Vol. 2, I , pp. 678–683.
[15] Wang, J. and Chalhoub, G. (2019), „Mobility support enhancement for rpl with multiple sinks‟, Annals of Telecommunications 74(498), 1–14.
[16] Winter, T., Thubert, P., Brandt, A., Hui, J., Kelsey, R., Levis, P., Pister, K., Struik, R., Vasseur, J.-P. and Alexander, R. (2012), „Rpl: Ipv6 routing protocol for low-power and lossy networks‟.
[17] Liang, W., Xiao, L., Zhang, K., Tang, M., He, D., & Li, K. C. (2021). Data fusion approach for collaborative anomaly intrusion detection in blockchain-based systems. IEEE Internet of Things Journal.
[18] Yang, Z., Yue, Y., Yang, Y., Peng, Y., Wang, X. and Liu, W. (2011), Study and application on the architecture and key technologies for iot, in „2011 International Conference on Multimedia Technology‟, I , pp. 747–751.
[19] Zhang, W., Han, G., Feng, Y. and Lloret, J. (2017), „Irpl: An energy efficient routing protocol for wireless sensor networks‟, Journal of Systems Architecture 75(1), 35–49.
[20] Cai, K., Chen, H., Ai, W., Miao, X., Lin, Q., & Feng, Q. (2021). Feedback convolutional network for intelligent data fusion based on near-infrared collaborative IoT technology. IEEE Transactions on Industrial Informatics, 18(2), 1200-1209.
[21] Kashinath, S. A., Mostafa, S. A., Mustapha, A., Mahdin, H., Lim, D., Mahmoud, M. A.,... & Yang, T. J. (2021). Review of data fusion methods for real-time and multi-sensor traffic flow analysis. IEEE Access, 9, 51258-51276.
[22] Wang, S., Celebi, M. E., Zhang, Y. D., Yu, X., Lu, S., Yao, X., ... & Tyukin, I. (2021). Advances in data preprocessing for biomedical data fusion: an overview of the methods, challenges, and prospects. Information Fusion, 76, 376-421.
